Adhesives

carpet glue

2011-09-06T11:23:00.019-07:00

Gukangli brand carpet glue is non-toxic from heavy metal, formaldehyde, benzene, 1,2-dichloroethane...etc harmful substances.
Item Description: carpet glue
Item No.: 806
Main Ingredients: neoprene rubber, resin, #6 solvent oil, age resister
Viscosity cp.s (25
o
C): 2200±500
Solid Content: 30% ± 2%
Heat Resistance: 75
o
C ~ 85
o
C
Aging Resistance: excellent
Volatilization Time (s): 3-5min
Opening Time (minute): 8-12min
Best Time for Conglutination: 5-8min
Applicable Material: suitable for the bonding between materials as plywood, wood, floor board, wallpaper, bamboo board, MDF, polyster plywood, carpet, glass, foam, sponges, fabric, clothes, metal, spray-gel floss, boards, and other multi-aperture
Implementary Standard: GB18583-2008

Operation Notice:
1. Coat both side s of the material, lay it for 5 to 10 minutes (or when it's not sticky to hand), bond together with pressure.
2. Conglutination time varies according to different temperature.
3. Drying time varies according to different temperature.
4. Try it before mass using, to make sure the glue is suitable for your material.

PU glue

2011-09-06T11:23:00.017-07:00

GOOD PU glue for shoe making. Environmentally friendly and with excellent quallity.

1.GOOD PU glue is with strong initial bonding strength, yellowing resistant, heat resistant,
2.general-purpose,for all kinds of material, suitable for PVCPUTPREVArubbergenuine leather.etc..
3. We manufacture the environmentally friendly PU glue, bezene free PU glue, need heating PU glue and cool bonding PU glue .
4.We manufacture many different items with different viscosity, different tack time. We can make the adhesive as customer's requirement or sample.

hotmelt adhesives

2011-09-06T11:23:00.015-07:00

1.Brand:Farseeing
2.Item:hotmelt adhesives
3.Mobile:0086-18939758527
4.Material:COPA
5.Spec:H1002p
Hotmelt adhesive powder(H1002p)
Type:
H1002p
Material:
Copolyamide(COPA)
Packing:
20kgs/bag
Particle size:
0-80um/80-170um/80-200um/120-200um/150-250um
Application:
screen heat transfer printing,flocking,interlining,rhinestones,automotive upholstery and other fields.
Substrates:
electronic materials,metals,fabrics, and other materials.

Type
Melt
Range
(
°C)

Melt Index g/10min@160°C

Melt Index
g/10min@160°C
Bonding

condition
Resistance to
Temp(
°C)
Press bar
(kg/cm2)
Time(s)
Water
Dry

H1002p
95-105

60
180
120-135
0.5-1.0
10-20
60°C
Excellent
Excellent

ceramics and metal epoxy adhesives

2011-09-06T11:23:00.013-07:00

1.this adhesion has great resistance of tensile and shear strengh
3.suitable for steel junction
4.waterproof anti--aging
YC188 steel structural epoxy adhesion, for twocomponent epoxy products, with strong adhesive,rapid curing in room temperature.
In steel and concrete with mutual or self-adhesive has excellent anti-aging, shock resistance. Hight Shear strength, and suitable for reinforcement with
a variety of buildings, installation of machinery and equipment . Suitable for steel -steel .steel concrete and concreteconcrete ; The adhesive can also be used to
anchor steel bars, bolts, and metal, ceramics, stone, cement products,
wood and other materials and so on

Note:all the technical data is provided by National Research & Analysis Center at
Chemical Building Materials
Hazard Symbols This product is not dangerous goods.however, Be able to transport
by the general chemical method . May cause sensitization by skin contact .
Eye contact will be irritation of eyes
when used pls with protection of gloves, masks, eye protection or other
protective items would have; accidentally get on skin or clothing
will be cleaned with plenty of water; if into eyes. Please medical treatment immediately

KeBao 6688 water-proof silicon sealant

2011-09-06T11:23:00.011-07:00

1.neutral silicon sealant
2.size: dia4.9cm*H23.2cm(300ml)
dia4.5cm*H32.5cm(590ml)
3.standard JC/T882-2001
KEBAO 6688 weather-proof silicon sealant

Product features/product characteristics
*single-component, easy to use, the temperature within 4~40°C could be easy for construction.(Directly extrude by the glue gun)
*Neutral curing, non-corrosive to the glass, coated glass, concrete, marble, metal or any other construction material etc.
*Curing quickly, high viscosity, medium-modulus, high movement capability
*Excellent weather-proof and aging resistance.
*Excellent resistance to high and low temperature, the performance changes little within the degree -40~150.
*For most of the construction materials, it can obtain the good viscosity without first coat.
*Good compatibility with others neutr al silicone sealant.

Main function/usage
*For weather-proof sealing to the curtain wall of various glass,aluminum plate,aluminum plastic composite panel.
*For sealing the marble(granite),concrete,tile,metal board joints, etc.
*Many other construction and industry uses.

Up to standard
Profession standard JC/T882-2001 Curtain wall joints silicone sealant

Color and package
*Color: black, grey, white, transparent or and other color under the customer’s requirement.
*Package: 300ml/cartridge/PC, 24PCS/CTN
590ml/sausage/pc, 20PCS/CTN

Storage period
*Keep in original seal condition and stored in cool and try place where the temperature should below 27°C that the storage period can be 9 month from date of production.

Wood flooring adhesive

2011-09-06T11:23:00.009-07:00

Wood flooring adhesive
Bonds many types of wooden parquet together or laminate,excellent water resistance,can used in outdoor.
D3 wood flooring adhesive

One component wood flooring adhesive is PVA based ,for bonding or laminating different types of parquet and small wood together ,it is different from other wood flooring adhesive from other company ,because it can not used to bonding cerement with wood .It is wildly used because of the the excellent perforrmanece and convencient for application.passed SGS,TDS,MSDS,ROHS,EN71 TESTwith good quality.

2.Technical Data
Item Name:
VicBond TY-1001 D3 wood flooring adhesive
Type:
Self Crosslinking PVA
Solid content:
48-50%
Viscosity
13000-18000cps
Materials:
Polyvinyl acetate emulsion
Colour:
Milky white
Odor
None-odor
Toxicity
Non-tox ic
Feature:
One component
Water resistance
D3 standard
Certification:
EN71,SGS,ROHS,EN204
MOQ:
5000KG
Delivery port:
FOB SHANTOU
Delivery time:
15-20days
Package:
500ml.1kg,4kg,20kg,50kg,200kg,1000kg

3.
ADVANTAGES:
• Excellent elasticity.
• One-componment,moisture cured,convenience of application.
• No solvent,no smell and odour after curing,environment-friendly,
• No corrosion to substrates.
• Excellent sound dampening qualities.
• good bonding quality.
• Reduce reflection and noise.

4.
Storage
Store Away from direct heat & Sunlight.

5.Shelf Life
1 Year in right temperature and environment .

6.Packing
Available in the packs of 250g,500g, 1kg, 5kg, 15kg, 20kg, 25kg, 50kg.

butyl alcohol

2011-09-06T11:23:00.007-07:00

Packaging Detail: 155kg/drum
Delivery Detail in two weeks after sign sc
Tertiary Butyl Alcohol(TBA)
purity: 99.9%
water: 0.05

Tertiary Butyl Alcohol(TBA)
appearance
Colorless transparent liquid or crystal
Assay%(m/m)≥
99.9
chroma(Pt-Co)No.≤
10
Water%(m/m)≤
0.05
densitykg/L
0.775-0.777
Boiling
Range
Intial boiling point≥
81.8
Dry point≤
82.8
acidity≤%
0.001
Residue on evaporation%≤
0.001
Recovery %≥
99.0
Freezing point≥
25

RTV-1 Concrete Exterior Wall Gap-Filling Silicone adhesive

2011-09-06T11:23:00.005-07:00

Exterior Wall Gap-Filling Silicone Adhesive for
Exterior wall gap-filling and waterproofing, concrete, tiles and joint sealing

1.Characteristics:
JH-338 belongs to
RTV-1

silicone adhesive
, expediently application between 5~40°C
Neutral curing, non-corrosive to marble (granite), aluminum, coated glass, metal ect.;
Quickly speed of curing, excellent adhesion, middle , excellent movement capability;
Excellent resistance to weather, the service life is over 50 years in the condition of general weather;
Excellent resistance to low and high temperature change. Little changes of performance at -40°C ~150°C;
Excellent
adhesive
to most of building materials without priming
Good compatibility with other neutral
silicone adhesive
;

2.Purpose:
For exterior wall gap-filling and waterproofing sealing;
For fitment filling;
Many other building & Industrial uses.

3.Typical Technology Data:

Performance
Standard
JC/T 882-2001
Measured Value

Testing method
Slumpability (mm)
≤3
0

GB/T 13477
Extrusion (ml/min)
≥80
289
Tack-Free Time (min)
≤180
90
Hardness (HsA)
/
49
GB/T 531
Loss of Heating %
≤10
4.2
ASTMC 792
Tensile strength in adhesion (Mpa)
≥0.4
0.808

GB/T 13477
Elongation at ultimate strength %
/
153
Permanent set adhesion
Non destroyed
Non destroyed
Movement Capability %
±20
±20
ASTMC 719
Stability
Store for 9 months at 20~30°C in cool, dry place after date of manufacture.

4.Application Standard:
Standard JC/T 881-2001 Concrete Building usage
silicone sealant

5.Restriction of Usage
Cant be used as structural
adhesive;
Unsuitable for the surface of all kinds of material that can effuse grease, plasticizer or solvent;
Unsuitable for the airproof location, because it is required to absorb moisture in air to cure for the
adhesive
;
Unsuitable for the frosty or moist surface;
Unsuitable for the continually soggy or moist place
Cannot be used the product, if the temperature is below 4°C or above 40°C on the surface of the materials.

6.Color and Package:
Color: Black, Gray, White, or other colors on request to JH-338
Package: JH-338: 310ml Cartridge net 300ml,

7. Joint Design and Working Procedure:
Please refer to Section The Technology Instruction of Jianhua
Silicone sealant

8. Technical Service
Offer the integral technical data of the product

9. Maintenance:
We passed the ISO9001 international quality system certification. And we control the quality according to the ISO9001 System strictly.
Insurance agent: PICC

Pro ject photos

double-component adhesive glue for film dry laminating-flexible packaging

2011-09-06T11:23:00.003-07:00

It is a bicomponent high performance adhesive, with strong adhesive, good transparency. The film has good performance.,
Polyurethane adhesive for packing lamination film
Adhesive for 120
o
C high temperature steaming lamination
HY502S/HY20S, 121
o
C proof
Polyurethane adhesive for packing lamination is our main product. It has been used by many domestic color printing factories including lots of famous enterprises. There are serious of proudcts with different specifications to meet different demands of customers. We could supply based on special requirements from customers.
Model
HY 502S HY20S
Category
Main agent Solidifed agent
Apperance
No color or light yellow transparent thick liquid
Ratio (%)
72+/-2 75+/-2
Viscosity(mPa.S/20
o
C
4000+/-5000 3000+/-500
NCO(%)
- 12.5+/-14< br>ratio
5 1
The product conforms to the requirement of the national standard for food and sanitory GB9683~1998
Product Feature and Usage Range
HY502S/HY20S is one of the Polyurethane adhesives for packing lamination. It is a bicomponent high performance adhesive, with strong adhesive, good transparency. The film has good performance., oil proof, shockproof, bending proof, low temperature proof and humidity proof, easy to use.
The product is applicable for all kinds of dry lamination machines with varied speeds, widely used in PET, BOPP, CPP, LDPE, HDPE, PT and aluminium foil, coated aluminium film, compound packing for all kinds of food and medicine. For plastic-plastic laminated product, it could resist the temperature of 121
o
C for 30 minutes for disinfection.

Use Instruction:
Ratio: the ratio of main agent to solidified agent is 5:1 for manufacturing soft lamination material. The ratio could be up for hard lamination material.

Di lution and the adhesive contents after dilution
To adjust the viscosity of the adhesive, please use the class one industrial acetic ester as dilution, with its moisture content less than 0.03%, and ethyl alcohol less than 0.02%. The formula for usage of acetic ester is as follows:

Qty of acetic ester =( qty of main agent X main agent content(%) + qty of solidified agent X solidified agent content (%))/adhesive content(%) – (qty of main agent – qty of solidifed agent)

The adhesive content is mostly between 20~30%. The user should decide on the adhesive percentage depending on the texture of the material which nees to be sealed, usage amount and the performance of the rubber roller.
Polyurethane adhesive for packing lamination film
Adhesive for 120
o
C high temperature steaming lamination
HY502S/HY20S, 121
o
C proof

Dilution ratio for reference

Adhesive needed (%)
45
40
35
30
25
20
Main ag ent(kg)
5
5
5
5
5
5
Solidified agent(kg)
1
1
1
1
1
1
Acetic ether (kg)
3.67
4.88
6.43
8.5
11.4
15.75

Adhesive Spread
The adhesive shall be evenly coated on the surface. 2~3.5 g/m
2
is recommended for the dry backing, and 4g/m2 for aluminium coating

Pre-processing on material
The surface shall be free of dust, oil, clean and dry. Corona processing must be done on the surface of the film before use so that the tension on surface reaches 0.038N/m-0.042N/m (38dyn/cm-42dyn/cm)

Requirement for lamination
Working environment: dry, with relative humidity not higher than 80%
Drying temperature: Area 1 Area 2 Area 3 (50~60)
o
C (60~70)
o
C (70~80)
o
C
Compression roller temperature: (50~90)
o
C depending on the texture of film
Compression roller pressure: (0.35~0.4)Mpa , the lamination pressure shall be kept as high as possible but not destroying the fi lm
Lamination speed: varired between machines

Curing condition
The laminated film cures at room temperature. The curing time is 24~48 hours with curing temperature at 50 plus 5 or minus 5 degree celcius.It will fully solidified with natural curing for 4~5 days at rooom temperature higher than 20
o
C. Please note that the working environment in winter is different. The laminated film could only be rewinded or used to make three layer laminated film after curing for one day, and cut in two or three days. The bag can only be made after full solidification. To make the transparent steaming bag, full curing in th curing room is a must. Curing temperature of (50+/-5)
o
C and curing timing above 48 hours are required. The curing timing and temperature for laminated aluminum foil shall be longer and higher.

Shelve life for adhesive mixture
The adhesive mixture shall be used up within 8 hours. The user shall match the adhesive based on the workloa d to avoid too much leftover and waste. For the leftover advisive mixture, it can not be used anymore in principle. With too much leftover, it could be thinned up with solvent and kept in cool and used as dilution to be mixed up with the new mixture the other day. If the mixture turns white, subtransparent or thickened obviously, then it could not be used any longer. After it is unpacked, it must be used up in short period. The solidified agent will easily go bad with humidity. It must be kept dry and kept sealed if not in use.

Transportation and storage
The product is flammable. It should be transported and stored as dangerous product.
It should be protected aginst fire, heat, explosion to sunshine, humidity and water. The package must be kept well in tranportation. The products must be lightly moved.

The storage must be kept away from the heat source and fire. It should be stored in the room temprature between 10 to 30 degree celsius and no sunshine. The storage place must be protected from fire, humidity, water. It needs to be dry, and well venilated. The adhesive can not be mixed with water, liquor or other liquid with active hydrogen.

The shell life for the adhesive is 10 months and 4 months for the solidified agent. It could still be used if it has not gone bad after expiry.

Double Component Polysulfide Sealant

2011-09-06T11:23:00.001-07:00

It used for high-grade highway ,airprt runway,swimming pool and water storage pool.
Product features:
Double component ploysulfide sealant is a two-component waterproof material which is singly packed and solidifies under ambient tempreture.It is also called sealing paste because it is a paste.The ploysulfide sealing paste is based on liquid polysulfide rubber,with addictive of various chemical assistants and ploymer material,processed with special synthesis procedures.It is a perfect poison-free waterproof sealing material.It features good aging resistance and water resistance,adhesion and elasticity.It could maintain good physical,chemical performance under codition of continous stretching,vibration and tempreture change.It has good adhesion to many metal and non-metal materials.
Application:
It is applicable for the waterproof sea ling,crack repairing and corrosion proof and waterproof by coating for concrete deformation joints such as expansion and settlement joints in construction including irrigation works and municipal engineering,undergroud structures (tunnel ,subway ,pipelines for water supply and drain),high-grade highway ,airprt runway,swimming pool and water storage pool ,and for building nodes,expansion joints and construction joints inassembly type buildings.
The main technical indexes :
No
Item
Unit
Index
1
Density
g/cm
3
1.6-1.7
2
Adaptation period
h
2-6
3
Tack-free tim
e
≤
h
24
4
Exidation inde
x
≤

4
5
Rheology

Smooth and Even
6
Slumpin
g
≤
mm
3
7
Low temperature flexibilit
y
≥
°C
-30
8
Maximun tensile adhering strengt
h
≥
MPa
0.2
9
Maximun elongatio
n
≥
%
300
10
Elastic recover
y
≥
%< br>80
Construction
1. Making the base surface clean ,dry and oil free.
2. Adhering atain preventing tape on both sides of deformation joints to keep both sides from staining.
3. Full mixing component a(basic sealing past,yellow)and component b (solifier ,black)in proportion of 10:1 in the container;also acceptable to make the mixtures in proper proportion of 10:0.8-1.2 based on weather change.Generally the mixing shall be conducted for more than five minutes if mechanical mixing is adopted.
4. Filling the ploysulfide sealing paste into the joints with scrapers and scraping it. Generally the paste is filled in two steps,with the first step of scraping the paste onto both side of the joints,and second step of filling the joint and scraping it .The paster gun may be utilized,the conpactness shall be checked upon completion of construction ,and then the scraper used the tear off the stain-proof tape .
5. The prepared paste shall be used within two hours,and oth erwise it will gradually solidify and cause difficulty to the construction.
6. It shall be kept from water and rain within 24 hours upon completion of construction.

Animal Bone Glue

2011-09-04T10:33:00.019-07:00

Bone glue is widely used in emery cloth,sand paper and textile sizing,electroplated finishes and wooden furniture.
Industrial Gelatin is light yellow or brown grain, which can pass the 4mm aperture standard sieve. It is mainly used in photographic paper, fixature and galvanoplastics liquid, match and wooden furniture. The product is under the QB/T1995-94 national trade standard. We can handle the SGS, ITS quality certificate and CIQ veterinary sanitation certificate and the note for changing the certificate of letting pass.
Technical Standard :
Item
Unit

Jelly Strength
(12.5%, 10°C) Bloom g ≥
420
380
300
180
Viscosity
(15%, 40°C) °E ≥
10
7
5
3
(12.5% 60°C) mpas ≥
17
14
11
8
(12.5%, 60°C)mps ≥
186
132
96
60
Moisture
% ≤
15
15
16
16
Ash
% ≤
2.0
2.5
2.5
3.0
Transparency
(5%, 40°C) mm ≥
100
50
25
-
PH

5.5-7

GND-Pubang PU foam sealant

2011-09-04T10:33:00.017-07:00

Purpose of PU foam
1) Fixing and adhesion
2) Filling slot and Sealing
3) CFC-free
4) Good quality and price
Specification limit:
1 Basic component: polyurethane (PU foam)
2 Density: 15~40 kg/m3
3 Curing time: 1~2 hours
4 Construction temperature: 10~30
o
C
5 Adhesive strength: 80 k/pa
6 Tensile strength: 30 k/pa
7 Bending strength: 40 k/pa
8 Compressive strength: 40 k/pa
9 Open cells rate: 35~60
10 Oxygen index: 22~25(normal) 28~32 (flame-resistant)
11 Permeate water Volume: 2~3(no epidermis) / 0.5(with epidermis)
12 Storage life: 12 month

Characteristic of PU foam
1) Carrying and using conveniently
2) Measuring conveniently
3) Automatic expand
4) Humidity cure
5) Automatic adhesion
6) Small pressure of foaming
7) Wide application

C5 hydrocarbon resin

2011-09-04T10:33:00.015-07:00

1. Appearance: granule
2.Softening point: 100 (95Deg. C ~105Deg. C)
3.enhance toughness, rigidity, and cohesion of the paint
C5 hydrocarbon resin used for hot melt road marking paint

1.
The specification of C5 hydrocarbon resin
:Type: PR-LDR1105 USED FOR HOT-MELT-ROAD-MARKING PAINT as follow:
Appearance: granule
Softening point: 100 (95Deg. C ~105Deg. C)
Colour(Gardner 50% Toluene): 5 #~6#
Density(25 Deg. C): 0.96~1.05;
Bromine Value(gBr/100g): 30~50
Acid Value(mgKOH/g): 1~2;
Ash Content(%): max0.1
MELT VISCOSITY (200Deg. C): 190~300
THIS TPYE RESINS CAN BE USED TO HOR-ROAD-MARKING PAINT ONLY
!It can enhance toughness, rigidity, and cohesion of the paint, forming a smooth painting surface and the resin will remain stable all round the year by adding agent with its quality matching C-200H petroleum resin produced by international counterparts.
2. Packing:
25kg PP. bag, paper & PP. compound bag, paper bag 500kg big bag.
20'FCL: Filled in 16Mt with pallet. Filled in 19Mt without pallet.
40' FCL: Filled in 20Mt with pallet; Filled in 26Mt without pallet

Glycerol Ester of Gum Rosin GER-85L,GER-85

2011-09-04T10:33:00.013-07:00

Glycerol ester of gum rosin are made from gum rosin or refined gum rosin through esterification with glycerol
Glycerol ester of gum rosin are made from gum rosin or refined gum rosin through esterification with glycerol, Used in pressure sensitive adhesives,adhesives products.
Granule or Flake, intertexture bag:Net weight 25kgs each bag.
Wuzhou Sun Shine Forestry & Chemicals Co. Ltd. (WSSFC), was previously known as Cangwu County Rosin Plant, which was established in the year of 1985 in China. WSSFC was restructured into a Chinese foreign joint venture in Dec.,1997.
WSSFC's paid up capital is RMB 70 million (approx. USD 10.3 million) .The total labor force is about 320.In March 2004, WSSFC was honored as High & New Technology Enterprises of Guangxi, and designated as teaching and practising base of Guangxi University and Nanj ing Forestry University. In 2006, WSSFC was awarded as "Top 100 Enterprises" of Guangxi.
WSSFC has a great advantage in geographical location, being located in Wuzhou district,the major plantation of pine tree and harvest of raw gum in China.
Capacity of its main products are: Gum Rosin 40,000MT, Turpentine 5,200MT, Food Grade Ester Gum 6,000MT, Hydrogenated Rosin 10,000MT, and various kinds of Rosin Esters and modified rosin products 32,000 MT.Total annual capacity is over 80,000 tons.
WSSFC has passed certification of ISO 9001:2000 quality system.
WSSFC exports its products to the major overseas markets directly, such as Europe,USA,Japan,South Korea and Southeast Asia etc
Wuzhou Sun Shine Taiping Forestry and Chemicals Co.Ltd. was invested independently into construction in Aug., 2007, with paid-up capital of RMB 28 million, the production base is capable of producing 20,000 MT of Gum Rosin, 2,500MT of Gum Turpentine and 10,000MT of Rosin Esters.< br>

decorative plywood glue

2011-09-04T10:33:00.011-07:00

white glue
For bonding furniture, construction material, fiber boards, furniture, Flooring, tabletops,etc..
Product name
white glue
Color
white
MF
[CH2CHCOOCH3]n
CAS No.
9003-20-7
EINECS No.
202-500-6
Solid content
15%-50%
P.h
3-6
Shelf life
12 months
Min Order
5tons
Payment terms
T/T (30% deposit, 70% copy of shipping documents)
Freight terms
FOB FOSHAN,CHINA
Lead time
10-15 days after your confirmation orders
Packing sizes:
20KG, 25KG, 50KG, 200KG, 1.1tons or can do as your OEM sizes
Using purposing:
For bonding furniture, construction material, fiber boards, furniture, Flooring, tabletops, laminas, Linoleum and rubber to wood, Concrete

Company introduce:
In the field of adhesive industry,
Foshan Huana Adhesi ve Manufactory
has set up for nearly
30 years
and focused on the development and manufacture of water borne, environmentally friendly and healthy adhesive products.
With industry-leading experience, we have 3 series of more than 100 kinds of adhesive items, such as PVAC emulsion, panel adhesive, Yellow adhesive, urea - formaldehyde resin adhesive, urea-formal dehyde resin glue, grainy adhesive and building adhesive. They are widely used in furniture making, masonry plate, wood product, textile, building material, and other fields. Our factory has always pursued the business purpose of "green environment, high-quality" and provides high quality products and good services for many well-known furniture, decorative panel, flooring and gypsum board enterprises at home and abroad. We have won customers' trust and recognition deeply.

Export Loading Photos:

HYDROXYPROPYL METHYL CELLULOSE(HPMC),construction industry

2011-09-04T10:33:00.009-07:00

1.has good water solubility,
2.dispersing and film-smoothability,adhesive.
Cellulose ethers can be widely used in construction meterials,paints synthetic resin,pharmacentical auxiliary material.Foods personal care products.
The viscosity ranges from 5cps-200000cps.
Index
Type
ME
MF
MK
Methoxyl content(WT%)
28.0-30.0
27.0-30.0
19.0-24.0
Hydroxypropyl content(WT%)
7.0-12.0
4.0-7.5
4.0-12.0
Gelation temperature(ºC)
58.0-64.0
62.0-68.0
70.0-90.0
PH value(1% solution ,25
o
C)
4.0-8.0
Ash content(WT%)
≤ 0.5 (1.0-Industry grade)
Loss on drying (WT%)
≤ 5.0
Burnt residues(WT%)-pharm grade
≤ 1.5
Heavy metal(PPM)-pharm grade
≤ 20
Arsenic(PPM)-pharm grade
≤ 2
Viscosity,(mpas)
5-200000cps

Non-corrosive antimildew silicone sealant

2011-09-04T10:33:00.007-07:00

1, Neutral antimildew silicone sealant
2, Non-corrosive
2, For kitchenware/bathroom/aseptic room
3, Application:JC/T885-2001
1. Characteristics:
One component, RTV-1, Neutral Curing at room temperature antimildew silicone sealant;
Excellent weatherproofing performance, Excellent anti-ultraviolet proper;
No need to prime coating, excellent joint to most building material;
Neutral curing, no corrosive to metal, coated glass, concrete, ceramics, marble etc;
Excellent compatibility with other neutral silicone sealant

2. Main Purpose:
Antimidew sealing in kitchenware, sanitary ware and aseptic room;
Seal and joint with various glass windows and doors;
other general joint and seal.

3. Main Technology Data:
Performance
Standard
Measured Value
Testing Method
Slumpability
HorizontalNot change shape
Not change shape
GB/T 13477
Vertical(mm)
≤3
0
GB/T 13477
Extrusion
≤10
3
GB 16776
Skin Time(h)
≤180
30
GB/T 13477
Peel Strength N/mm
≥1.0
3.9
GB/T 13477
Tensile Strength in Adhesion (Mpa)
-
0.7
GB/T 13477
Tensile proper
No damage
No damage
GB/T 13477
Movement Capability(%)
±20
±20
ASTMC 719
Anti-midew
Class A
Class A
GB/T 1741
Aging Test
Passed
Passed
ASTMC 793
Storage
9 months shelf life if stored below 27°C in cool, dry places after the date of production

4. Application Standard:JC/T885-2001

5. Restriction of Usage:
l Cannot be used as structural sealant;
l Not compatible with materials with grease or exudation;
l Unsuitable for the airproof location, because it is required to absorb moisture in air to cure;
l Unsuitable for the frosty or moist surface;
l Cannot be used on the substrate surface under 6°C or above 40°C

6. Construction Method:
l Please do adhesion test or compatibility test to assure the applicability of product;
l Please clean the joint with solvent such as toluene, xylene and acetone, then keep it dry;
l Tape is used to cover the deges of the joint to make silicone sealant sealed perfectly, but it cannot contact the sealed surface;
l Cut the nozzle at the desired size. Keep good contact between the silicone sealant and joint, and remove the tape before the sealant is cured;
l Please keep ventilate for the construction site.
l
7. Safety
l Silicone sealant will release volatile compound so that it could be harmful to health, therefore, please keep good and ventilate;
l Silicone sealant will not release any harmful substance and anything harmful to health after cured;
l Keep uncured sili cone sealant beyond children’s reach. If getting into eyes, wash off with running water and consult a doctor;

8. Warranty
l As an ISO9001,ISO14001 certified company, we are committed to establish and implement the ISO9001 Quality Management System.
l We will sign the Quality Guarantee with customers after they buy our products and confirm the construction organization and engineering.

New Huijia 228 acid glass silicone sealant

2011-09-04T10:33:00.005-07:00

High quality and good price. The silicon sealant has passed ISO9001 international system certification.
1.Features:
New Huijia 228 acid glass silicone sealant is the single component, acetic type, room temperature curing, high-quality silicone sealant, easy to use, fast curing, has excellent resistance to weather, with good adhesive properties to a variety of building materials. Widely used in glass, aluminum, ceramic, glass fiber, non-oily wood and glass doors and windows and other works of the bonding and sealing, can not be used as a structural sealant.
2.Instructions for use
• Clean the surface of the material which need bonding with acetone or other solvents.
• Labeled low viscosity adhesive tape to the site where need to protect , trim and remove the tape before the adhesive curing.
• The user must determine the product suitability themselves, should be bonded on-site compatibility test, to confirm whether there is a good product and substrate bonding and the gap is actually played, the Company takes no responsibility for any accident caused damage .
•Ensure that the glass sealant has been full of the crack.
• 10 minute surface cure, non-stick hand within 1 hour, 7 days full cure and optimum strength.
• Uncured sealant can be used solvents (eg turpentine) to clear ,the excess curing adhesive can be removed with scraper.
3.Safety glass
Ensure that the construction site must keep good ventilation, if contact with the eyes should be washed immediately with plenty of water and ask to the doctor for help, keep the children out of reach the adhesive.
4. Implementation of standards
GB/T14683-2003 Hardware support: 300ml Soft Packet: 590ml

5.Storage period
Storage temperature should be stored at 5-27 °C, relative humidity less than 5 0% environment, from the date of production, storage of 9 months.

6.Technical Specifications
Droop degrees (mm)
Extrusive characteristic
(ml/min)

Tack-free Time (min)

Shore hardness (A)
100% Tensile modulus
(Mpa)
23°C
-20°C
Tensile-
strength
(Mpa)
Elongation at break %
0
326
7
21

0.34
0.46
0.79
380
The company is only responsible for the product quality conform to the above standard, regarding surpasses the consequence which outside the product standard creates, this company is generally irresponsible.

PVC repair glue

2011-09-04T10:33:00.003-07:00

1. Small package with customerized imprinting.
2. Transport to door to assign place.
3. Confirms to ASTM, EN71 and REACH....
5ml Tube glue/ vinyl cement/ pvc glue/ repair adhesive/ seam sealer

1.Cute and small tube, pure argent color let you abate the cost and increase added
value for your products.

2.Vinyl glue, rubber sealant for bicycle wheel, PVC adhesive, Dowcorning Silicone Pass EN71 Part III and ASTM963-96.

3. Shin Dorn can print 2-4 colors on cylinder tube.

4. High quality Internallly lacquered and tail glue let product inside safely.

5. Product day can print on the tail of aluminum tube.

6. Use all automatic machine to make your product.

7. Aluminum tube with printing pass EN1122, EN12472, EN1811, ISO14184-1, EN71 part I to part 3, our aluminum tube with printing fit Eu rope standard, can be seen toy for your reference.

8. Use 99.7% aluminum to made aluminum tube.
9. High quality with best price.
If you got interesting, please contact with me without hesitate.

Glass furniture adhesive(glue)

2011-09-04T10:33:00.001-07:00

Fast curing, high strength Ultra Violet adhesive. Specially designed for bonding glass to metal, even Glass
Fast curing, high strength Ultra Violet adhesive. Specially designed for bonding glass to metal, even Glass to Aluminum cake and glass to Stainless Steel bonding in the manufacturing of glass and crystal furniture.
Suitable for safety glass and coloured glass (partly UV radiation absorbing).
Physical properties
Composition: methacrylate ester
Colour : colourless
Viscosity (Brookfield 25°C–mPa.s) : 600 - 1300
Specific weight (g/ml): 1,1 and 1.4
Curing time UV (365 nm): 8 – 15 seconds
Gap to fill: from 0,03 mm to 1,5 mm
Flash point: > 100°C
Shelf life : 1 year